JW course

Codelogy Course #SP103

Days: Tuesdays & Thursdays
Total Hours for this course: 21 Hours
Time: 4:30 pm to 7:30 pm
Nights: Seven (7) Nights
Dates: February 7^th, 9^th, 14^th,16^th, 21^st, 23^rd, & 28^th
Class Size:5 Minimum - 10 Maximum
Instructor: Gary Clifton

Description:. This Course is a thorough review of the use and understanding of the National Electrical Code. If you are rusty on code, this course is recommended for the State Certification Exam.

*Course Fee $40.00

OSHA 30 Hour Training Course#SP109

Days: Mondays & Wednesdays
Total Hours for this course: 32 Hours
Time: 4:30 pm to 8:30 pm
Days: Eight (8) Nights
Dates: April 2^nd, 4^th, 9^th 11^th, 16^th, 18^th,23^rd, &25^th
Class Size:10 Minimum - 40 Maximum
Teacher: Shawn Skaggs

Description:Class will cover thirty-two (32) hours of training. Thirty hours are required by the Occupational Health and Safety Act (OSHA), that apply towards the 30-hour Construction Industry course completion card. The course is comprised of 25 Sections that will cover hazards and safety requirements in the construction trades.

*Course Fee $30.00

Advanced Conduit Bending Course #SP102

Prerequisite: experience on GREENLEE 881 Hydraulic Bender or equivalent.

Days: Tuesdays & Thursdays
Total Hours for this course: 15 Hours
Time: 4:30 pm to 7:30 pm
Nights: Five (5) Nights
Dates:      February 7^th, 9^th, 16^th, 21^st, & 23^rd
Class Size:   6 Minimum - 12 Maximum
Instructor: Ron Chesnut

Description:   Bending 2 ½” EMT thru 4”EMT on the GREENLEE 881 Hydraulic Bender,
measuring techniques, matching bends and segment bending.

*Course Fee $40.00

Motor Controls Course #SP104

Days: Mondays & Wednesdays
Total Hours for this course: 18 Hours
Time: 4:30 pm to 7:30 pm
Nights: Six (6) Nights
Dates: March 5^th, 7^th, 12^th, 14^th, 19^th, & 21^st
Class Size: 5 Minimum - 10 Maximum
Instructor: Bart Murray

Description:Class will cover motor theory and operation of both AC and DC motors,
Article 430 of the NEC, hands-on wiring of single phase and three phase motors, drawing ladder
diagrams, wiring diagrams and hands-on control wiring.

*Course Fee $40.00

The new Advanced Lighting Controls Class will consist of a ten to fifteen hour online pre-requisite and fifty mandatory hours of classroom time. There will be an orientation one week before class starts to go over all the requirements. This is a new class that is required by PG&E to do lighting in our buildings across San Francisco and the State of California. The class will be 12 nights, 4:30pm to 8:30pm, plus orientation. We can only take 16 wiremen at a time for this class and we will have a waiting list. The class will consist of lecture and a tremendous amount of hands on work (labs). At the conclusion of the class there will be a written test that will have to be taken and passed by the student to become certified in Advanced Lighting Controls. All hours related to this class can also be used for your required 32 hours for California Electrical Certification.

You must be an IBEW Journeyman & have a current legal California Electrical Certification License.

You must attend all classes and pass the comprehensive final exam in order to be eligible for the completion certificate. If you have any questions please call.

Stephen M. Powers
Training Director SFJATC

California Advanced Lighting Controls Training Program
Class Schedule

Registration form

1)Course# CAL100

Orientation:       February 21, 2012 (4:30pm - 6:30pm)
Class Schedule:    March 5^th, 6^th, 7^th, 8^th, 12^th, 13^th,14^th, 15^th, 19^th, 20^th, 21^th & 22^nd
Class Time:       4:30pm - 8:30pm

2)Course# CAL101

Orientation:       March 20^th, 2012 (4:30pm - 6:30pm)
Class Schedule:        April 2^nd, 3^rd, 4^th, 5^th, 9^th, 10^th,11^th, 12^th, 16^th, 17^th, 18^th & 19^th
Class Time:      4:30pm - 8:30pm

3)Course# CAL102

Orientation:       April 17^th, 2012 (4:30pm - 6:30pm)
Class Schedule:        May 7^th, 8^th, 9^th, 10^th, 14^th, 15^th,16^th, 17^th, 21^th,22^st, 23^th, & 24^th
Class Time:      4:30pm - 8:30pm

Estimating/Take-Off Class Course #SP106

Days: Tuesdays & Thursdays
Total Hours for this course: 18 Hours
Time: 4:30 pm to 7:30 pm
Nights: Six (6) Nights
Dates: April 9^th, 11^th, 16^th,18^th, 23^rd, & 25^th
Class Size:8 Minimum - 15 Maximum
Instructor: Bob Bourdet

Description:This class will cover basic estimating, material take off, labor unit review and specification review. It will teach you how to use the estimate for job management, and will cover both new spaces and tenant improvement projects

*Course Fee $40.00

OSHA 30 HOUR TRAINING Course #SP101

Days: Mondays & Wednesdays
Total Hours for this course: 32 Hours
Time: 4:30 pm to 8:30 pm
Nights: Eight (8) Nights
Dates: February 6^th, 8^th, 13^th, 15^th, 22^nd, 27^th, 29^th, & March 5^th
Class Size: 10 Minimum - 40 Maximum
Instructor: Shawn Skaggs

Description:Class will cover thirty-two (32) hours of training. Thirty hours are required by the Occupational Health and Safety Act (OSHA), that apply towards the 30-hour Construction Industry course completion card. The course is comprised of 25 Sections that will cover hazards and safety requirements in the construction trades.

*Course Fee $30.00

Power Quality Course #SP110

Days: Mondays & Wednesdays
Total Hours for this course: 12 Hours
Time: 4:30 pm to 7:30 pm
Nights: Four (4) Nights
Dates: April 2^nd, 4^th, 9^th, & 11^th
Class Size:5 Minimum - 12 Maximum
Instructor: Bill Weindorf

Description: How to use digital multimeters and Fluke 43B Power Quality Meter to diagnose power quality problems. Voltage drop, voltage transients, Power Factor, Harmonics, Current Inrush and Average -vs- True RMS meters

*Course Fee $40.00

OSHA 30 HOUR TRAINING Course #SP105

Days: Tuesdays & Thursdays
Total Hours for this course: 32 Hours
Time: 4:30 pm to 8:30 pm
Nights: Eight (8) Nights
Dates: March 6^th, 8^th,13^th, 15^th, 20^th, 22^nd, 27^th, & 29^th
Class Size: 10 Minimum - 40 Maximum
Instructor: Pete Chursin

Description:Class will cover thirty-two (32) hours of training. Thirty hours are required by the Occupational Health and Safety Act (OSHA), that apply towards the 30-hour Construction Industry course completion card. The course is comprised of 25 Sections that will cover hazards and safety requirements in the construction trades.

*Course Fee $30.00

Fire Life Safety Codes Course #SP108

Days: Tuesdays & Thursdays
Total Hours for this course: 12 Hours
Time: 4:30 pm to 7:30 pm
Nights: Four (4) Nights
Dates: March 20^th, 22^nd, 27^th, & 29^th
Class Size:6 Minimum - 12 Maximum
Instructor: Paul Ortiz

Description:This class will help you understand the codes for High Rise Life Safety and how testing is performed.

*Course Fee $30.00

Advanced Conduit Bending Course #SP111

Prerequisite: experience on GREENLEE 881 Hydraulic Bender or equivalent.

Days: Tuesdays & Thursdays
Total Hours for this course: 15 Hours
Time: 4:30 pm to 7:30 pm
Nights: Five (5) Nights
Dates: April 10^th, 12^th 17^th, 19^th, & 24^th

Class Size: 6 Minimum - 12 Maximum
Instructor: Ron Chesnut

Description: Bending 2 ½” EMT thru 4”EMT on the GREENLEE 881 Hydraulic Bender,
measuring techniques, matching bends and segment bending.

*Course Fee $40.00

Safe Work Practices 70E Course #SP114

Days: Tuesdays & Thursdays
Total Hours for this course: 15 Hours
Time: 4:30 pm to 7:30 pm
Nights: Five (5) Nights
Dates: February 16^th, 21^st, 23^rd, 28^th,& March 1^st
Class Size: 10 Minimum - 20 Maximum
Instructor: Paul Ortiz

Description:. Awareness of hazards facing the Electrical Worker working on or near energized Electical Equipment: Lockout/Tagout, P.P.E., Etc.

*Course Fee $40.00

Foreman Development Training Course#SP115

Days: Tuesdays & Thursdays
Total Hours for this course: 30 Hours
Time: 4:30 pm to 7:00 pm
Days: Ten (10) Nights
Dates: April 3^rd, 5^th, 10^th 12^th, 17^th, 19^th, 24^th, 26^th, May 1^st& 3^rd
Class Size:10 Minimum - 20 Maximum
Teacher: John Gallagher

Description: Class will cover all aspects of being a forman in the Electrical Industry. How to put a job together, dealing with manpower, order material, etc. Organizational skills, communication skills & attitude will all increase after this class.
*Course Fee $40.00